Aerospace Engineering Assignment Help

Determine the deflections and stresses in a loaded Pilatus PC/9 wing using finite element computational modelling. The aircraft wing can be simplified using appropriate beam-plate representations. You must decide how to represent the wing to provide meaningful results. This is a major focus of the assignment and much detail and explanation is expected for all choices in your numerical calculations.

The aerodynamic lift of the wing is described by the distributed load of 2w x 300 1 0.04 N/m. The mass of the wing is 27 Kg, and its center of mass is located 2 m from the wing root R. (a) Determine the magnitude of the force and the moment about R exerted by the lift of the wing. (b) Determine the reactions on the wing at R.

The amount of time taken to travel from Earth to Mars. Spacecraft design to land the on the surface of Mars. Estimated cost of sending to the Mars.

Ideal Turbojet Performance Analysis, results and discussion

For small flow rates, the volume flow rate Q through a small triangular-section tube of side W and length L is a function of dynamic viscosity , pressure drop per unit length p/L and W. Using Buckingham pi theorem, express the relation between variables in a non-dimensional form .

Research and design a small smart drone, use CAD package to design the drone model and investigate the aerodynamic performance using CFD and wind tunnel test. Then optimist the design for best aerodynamic performance.

Determine the orbit of an object that you have observed. You will determine the object state vector at a time of the first observation and create a simulations of the orbital trajectory.

Describe how the temperature is controlled in the product stream of the PID sketch below. Make specific reference to pump and control valve operation.

The first part should be solved manually, and the second part should be done by using abaqus software. Consider a first-order triangular element, if we know the coordinates (x,y) and the displacements (u,v) at the nodes as follows: Node 1: (x1, y1) = (3.0,3.0), (u1, v1) = (0.012,0.006) m Node 2: (x2, y2) = (2.0,4.0), (u2, v2) = (0.015,0.005) m Node 3: (x3, y3) = (1.0,1.0), (u3, v3) = (0.010,0.008) m a) Find the interpolation functions for this element. b) Calculate the displacements (u, v) at the points (4, 3) and (3, 2).

Describe the difference between live road and dead road provide atleast two examples of each And answer other question as well.

Design an efficient retaining wall to be used along the rear of excavated area of the tank. Depending on depth of cut and height of soil to retain,dimensions for both stocky and slender retaining wall will be designed. Retaining walls will be designed to resist against three major failure modes including overturning, sliding and bearing. Based on the design of retaining walls to resist mentioned failure modes, optimal dimensions for the most economical shape of retaining wall will be proposed.

The aim of the experiment is to determine, by experimental methods, the imperfections inherent in struts, for up to three materials i.e. steel, brass and aluminium.

Few tasks related to different cipher processes, from ancient Caesar cipher to digital signature of files. This is a great way to practice and fully comprehend concepts of hash, public key, private key and cracking and encryption. In this case we based some of the task on Linux commands and the rest required only simple math calculations

Explain in your own words the purpose of the command in the context of the assignment question. Also, you need to explain in your own words all terminology used—as if you were explaining to an average user. Show that the command worked—either from its output or the output from another command. To capture text output from programs you will have to redirect the output to a file or use the command script.

Design and implement a secured network infrastructure that ensures high availability, reliability, scalability, performance and security to support GB services. This requires 1) the design of the network; 2) the delivery of a comprehensive network security plan; and 3) Security technology implementation - proof of concept.

Required to develop a numerical model (PCSWMM) to carry out your ProjectWork and assess the adequacy of the existing drainage infrastructure for flood and water quality fora single event.

Produce an engineering survey of the university car park, together with associated calculations using linear surveying, levelling techniques and angular measurements.

Your task is to write a report .You are part of a company’s engineering group asked to design a new cellular phone that is essentially disposable – that is, the expected useable life span is 12-18 months.

Design and Analysis of Two-Stage Amplifier

Design of a Feedback control System- PID Controller

Analog modulation/Demodulation Technique

You are required to design a simple CMOS circuit consisting of a two-input NOR gate. You are required to show the layout (plan view) of the circuit, after calculating the aspect ratio (W?L) of the transistors. The Layout of the circuit includes the VDD and ground lines.

Choose a specific enterprise (it should be one with which they are somewhat personally familiar) and develop a sustainability indicators monitoring system for that enterprise. I want to proof read my project, please add literature review and do the citation 

Essay On Computer security Architecture –Information technology